[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: D60A2 tire pressure reccomendations...thanks!

To: GY3WSX@VM.SC.EDU (Daniel Hussey)
Subject: Re: D60A2 tire pressure reccomendations...thanks!
From: Andrew Duane USG/PE <duane@zk3.dec.com>
Date: Wed, 23 Oct 1996 08:06:52 -0400 (EDT)
Cc: quattro@coimbra.ans.net (Quattro List)
In-Reply-To: <199610230405.AAA15983@coimbra.ans.net> from "Daniel Hussey" at Oct 22, 96 10:02:34 pm
Reply-To: duane@zk3.dec.com
Sender: owner-quattro@coimbra.ans.net

Hairy green toads from Mars made Daniel Hussey say:

> Thanks to all who replied to my post on tire pressure reccomendations.
> I filled the fronts to 37 psi and the rears to 35 psi and I'm going to try
> that for a while.  If I think I want it stiffer, I'll add a little more. I was
> just not sure about adding that much without your go ahead since the sidewall
> said max pressure was 35 psi.  Thnaks again.

Actually, I believe the sidewall says: MAX LOAD <xxx> KG at 35 PSI.
This is the max load rating, not the max pressure rating.

-- 

Andrew L. Duane (JOT-7)			duane@zk3.dec.com
Digital Equipment Corporation		(603)-881-1294
110 Spit Brook Road
M/S ZKO3-3/U14
Nashua, NH    03062-2698

Only my cat shares my opinions, and she's too heavy to care.

References:
- D60A2 tire pressure reccomendations...thanks!
  - From: Daniel Hussey <GY3WSX@VM.SC.EDU>

Prev by Author: Re: CQ shocks (again)
Next by Author: Three Cheers for Dan
Prev by thread: D60A2 tire pressure reccomendations...thanks!
Next by thread: Redline MTL source?
Index(es):
- Author
- Thread