[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
adding relays to euro lights
This is a relatively simple task, once you know how the relays
are wired. I plan to use two relays, one for high beams and one
for low beams. Should I use more?
The question is... there are wires from the headlights that go
through the fuse box and then to the switch. What is the
best place to intercept the wire so that the signal goes
from the switch to the fuse to the relay, then to the light?
Should I wire the relays close to the headlight?
Should I just discard the existing wiring?
I'm hoping that my existing electrical problem (lights, power
cut out at random but always with lights on) is somehow related
to the lights and that adding relays will fix the problem.
I'd especially like to hear from anyone who has wired relays on a
car using the quad 4x6 euro light setup (ie urQ or 84 4000/80q)
| Dan |