[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: SUB FRAME BUSHINGS

To: dougev@newpig3.newpig.com (dougev)
Subject: Re: SUB FRAME BUSHINGS
From: randrews@post.cis.smu.edu (Robert Paul Andrews)
Date: Wed, 4 Dec 1996 16:03:36 -0600 (CST)
Cc: quattro@coimbra.ans.net
In-Reply-To: <c=US%a=_%p=New_Pig_Corporat%l=NEWPIG9-961204173533Z-12700@newpig9.newpig.com> from "dougev" at Dec 4, 96 12:35:33 pm
Sender: owner-quattro@coimbra.ans.net

> without taking the sub frame out?  Can I install the new ones by 
> freezing the bushings in liquid Nitrogen and heating the frame with a 
> torch?  Any help would be appreciated.  Thank you,  
Ok- I am no expert here, but just about anything dipped in lquid nitrogen
becomes VERY brittle.  I would strongly recommend against it.  Instead,
take down the subframe and have a shop press em in and out for you.
Later!
Rob

References:
- SUB FRAME BUSHINGS
  - From: dougev <dougev@newpig3.newpig.com>

Prev by Author: Haven't seen messages
Next by Author: 89 200T opinion wanted
Prev by thread: SUB FRAME BUSHINGS
Next by thread: Bleeding ABS or Bleedin' ABS
Index(es):
- Author
- Thread