Re: Need help - instructment light replacement

[Solomon Ngan <sngan@netaccess.on.ca>]

Hi Robert,
I guess my problem is how do I go about pulling out the instructment
cluster,
ie: the lower-center one that houses the voltage, oil pressure and the 
oil temperature gauages.  It is just above the ash tray in my '90
90q20v.
Thank you for any information on the subject.

Solomon

Robert Myers wrote:
> 
> Solomon,
> 
> I haven't done that particular bulb, but basically all that's needed is to
> pull the instrument cluster and put in a new bulb from the rear.  Get the
> bulb from your local dealer's parts dept first.
> 
> Removal of the IC is fairly easy, at least it is in my '89 200TQ.  If you
> need more info, lemme know.
> 
> At 07:07 PM 12/14/96 -0800, you wrote:
> >Hi everyone,
> >It's my turn to change the light bulb of the voltage gauge for my '90
> >90q20v.
> >Would anyone have info on how to go about it ?
> >How much of the center console do I have to take out ?
> >While I'm at it, is it advisable to change all the bulbs ?
> >Thanks
> >Solomon
> >
> >
> ___
>    Bob
> ****************************************************
> *  Robert L. Myers         rmyers@wvit.wvnet.edu>  *
> *  Rt. 1, Box 57            304-574-2372           *
> *  Fayetteville, WV 25840                          *
> *  Obligatory quattro and sleddog-L references:    *
> *  My 3 huskies enjoy riding in my '89 200TQ       *
> ****************************************************