Re: FW: 86 4K Quattro Drive Shaft CV Joints

[Dan Simoes <dans@ans.net>]

kappa@travelin.com wrote:
> 
> On Fri, 03 Jan 97, "Tilden, John" <tilden@data-io.com> wrote:
> >
> >
> >
> >
> >I'm still trying to source the CV joints for the central drive shaft for the
> >Quattro!
> >I have some numbers off the Joint itself, but that's not getting me very
> >far!
> >
> >     LOBRO   4885   (I'd guess that is the date code)
> >     7 153 12 01 84 020  Lobro, and
> >     7 153 12 01 84 015 (no Lobro markings)
> >Both parts are identical, I'd guess that the 020,and 015 are just different
> >revision levels or different manufactuers of the same part!
> >
> >The local Bearing Supply houses don't have any cross reference for these
> >joints!
> >
> >Physical Dimensions:
> >     OD       100 mm
> >     Bolt Circle  86 mm, 6 bolts, clearance holes 8 mm
> >     Thickness 32 mm
> >     Spline       25 Teeth, OD-27.2 mm, ID-26 mm
> >Can any one help?
> >
> >Thanks John Tilden
> >tilden@data-io.com
> >
> >
> 
> I know other people are working on this as well.  Jim at Blau
> has these and rebuilds prop shafts for sale w/core etc.  But he's
> not going to tell.  It can be done, keep at it.
> 
> -Stott Hare
> '84 4Ksq  (black _& blue_, have turbo, waiting to install...)
> Biddeford, Maine
> 
> harest@allenbrook.iix.com
> kappa@travelin.com

I'm almost positive that all the numbers are in the archives somewhere.
Seek and you shall find :)

| Dan |