Re: Ignition wires

[STEADIRIC@aol.com]

>I replaced the wires on my 86 5ktq, and had the same prob. Easiest
>solution is to split the plastic housing along the crease line. It's
>pretty thin, and is easy to cut with shop knife. Epoxy it closed if you
>want. I left mine open, the wires aren't going anywhere once they're in
>the tube, if you split it carefully.

The easiest solution is to get the wires WITH The loom, I just got a set 
for Bruce with them and they are'nt that expensive. (About $70 I think)


Later!


Eric Fletcher S.O.C.
'87 5KCSTQIA2RSR2B
St. Louis, MO

STEADIRIC@aol.com