PHIL - Please THINK before you post

[quk@sievers.com (Phil Payne)]

In message <970115090051_1691098506@emout05.mail.aol.com> QSHIPQ@aol.com writes:

> >>>>YO PHIL, if you aren't going to read my posts, then lets drop this right
> now....  The reason you have a right and left side is becuz of the center
> high beam location, not becuz of the beam pattern....  If you want to
> discredit my homework, do so from knowledge and btdt, not from your
> chair.....

OK - here goes, again.  The left and right prismatic mouldings on my headlight 
glasses are _DIFFERENT_.  Got that?  The slope of the rising beam cut-off on 
the left of each beam is _DIFFERENT_ - it's about 60 degrees to the horizontal 
on the left light and about 40 degrees on the right light.

--
 Phil Payne
 phil@sievers.com
 Committee Member, UK Audi [ur-]quattro Owners Club