Re: removing taillight (tracing battery drain)

["Meron" <phwomp@cosmoslink.net>]

>I believe the adhesive resists these
>impact-type forces, and to release them you will need to break an edge
>loose and use constant force.
It is not really an adhesive it is more like a sticky rope , just pound on
it with a rubber mallet and they will pop out. The reason you had trouble
removing them was because the sealant dried a bit and got stuck, (I removed
many including some from older  Audis).
Good luck
Avi Meron
86 5Kcstq