Ur q big brake question

[EICHSTEV@aol.com]

The parts are all together now for the brake system to be installed on the
Not So Ur q.  I have G60 calipers with Brembo crossdrilled calipers for the
front with V8 rear vented brakes for the back and a V8 25mm master cylinder.
 The MC fits beautifully on the stock ur q brake booster when used with the
spacer found on a 90 20V MC (sorry, don't know the P/N).

With that lead in, I am wondering if there is any FACTORY proportioning valve
setup which would allow me to adjust front/rear brake bias without going to
an aftermarket valve like the Wilwood or Tilton pieces.  I like using factory
pieces whenever possible in my project unless absolutely necessary.  If I
didn't, those nice 4 pot 944t calipers would be going on...

Steve Eiche
'82 Not So Ur q 3B2B

P.S.  Anybody have an RS2 exhaust manifold and turbo they want to get rid of?
 Cams would be nice too. OK, just thought I'd check.....