[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: UrQ dump valves / lighting.
At 09:04 AM 2/14/97 -0500, you wrote:
>Am I correcting in assuming that UrQ intercoolers which are
>all aluminum are not adaptable to the third inlet needed for a
>proper dump valve installation? TAP sells the dump valves
>but I don't like the fact they dump into the atmosphere. Any
>thoughts? Secondly, AM cars can do the UrQ conversion to
>the late model euro-UrQ (sloped lights) for about $800. Their
>conversion to the intermediate (flat) style lights is closer to
>$900. No idea why that is. Anyone have any other sources in
>the UK or elsewhere? So far TAP is the least expensive but
>they can't help me find the addiitional trim pieces that I will
>need. Thanks.
Andrew,
Am I correct in assuming that you are in the USA? If so, you do not want
any lights from the UK. They drive on the opposite side of the road there,
and the beam spread is wrong. I bought mine from Shokkan, cot was about
$250 each. You will also need the front grill from a '85 and up coupe or
4000, as well as the right and left upper and lower trim pieces. I got the
trim pieces from Linda at Carlson, and the grill from a wrecking yard.
Total cost was closer to $600 than $800. Good luck, the look is well worth it.
>
>Andrew Finney.
>1983 UrQ
>
>
Regards,
John Karasaki
Audi Quattro Fanatic