[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

89 200 Turbo problems



In message <970218170004_1147581005@emout02.mail.aol.com> QSHIPQ@aol.com writes:

> What are the WR and MB?  Are these both 10vt applications Phil?

Both ur-quattro.

> Of what years?

1980-1987, 1988/9

> BTW, I checked the 10mm triple square on my 84 Urq...  It is
> indeed a 10mm fitment...  What year is yours?

Hrmm.  Fun.

OK.  According to the microfiche, _both_ my cars should be 10mm.

The Coupe GT uses two sizes - M8x48 (113 501 229C) and M10x48
(900 972 01).  The 10mm variant is marked "5 cylinder models".
The problem is that I know this 1983 car has a 1985 5-cylinder
engine - what else wasn't swapped?  Did it start life as a
4-cylinder?

Passing on that for a moment - according to the ur-quattro
fiche, _all_ ur-quattros should have 10mm screws - M10x48 for
the urq, M10x55 for the Sport.  My 8mm tool, however, seems to
fit my urq ...

More later ...

--
 Phil Payne

 Phone: +44 385302803  Fax: +44 1536723021  CIS: 100012,1660