[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Am I Just Lucky?
Mr. QSHIPQ@aol.com said:
> A 2 foot extension is not a "lucky" removal, it works... If you look at Mr.
> Bentley, it shows a audi tool (xxxx) that is at least a foot long, then the
> torque wrench is attached to that, and THAT has a 258 ft/lb torque on it...
> If you do your math, and don't use the audi tool the actual spec is much
> more than 258.... The main reason most UNDERTORQUE their bolts, and I would
> surmise, why I have corrected as many as I have... Look carefully at that
> bentley....
You are right. Steve Bucholtz also pointed out that the wrench
attachment point is not in line with the bolt; therefore, it's a
lever/torque amplifier. Weird!! Guess they figure that 258 +/- is
the heaviest wrench available, so they came up with a device to add
torque.
I used a bit of anti-sieze on the bolt, and put at least 100 pounds
of heft on it at the end of a 4-foot pipe. That's LOTS of torque any
way you measure it. I doubt if it comes loose.
*.......................................................*
Al Powell, Ph.D. Voice: 409/845-2807
107 Reed McDonald Bldg. Fax: 409/862-1202
College Station, TX 77843
Http://agcomwww.tamu.edu/agcom/satellit/alpage.htm
*.......................................................*