[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Where to mount front license plate

To: lenny rosenbaum <lenny@spectra.net>
Subject: Re: Where to mount front license plate
From: e6941tb@ix.netcom.com
Date: Sat, 01 Mar 1997 08:51:25 -0800
CC: quattro@coimbra.ans.net
References: <3.0.32.19970301080826.006945b8@spectra.net>
Sender: owner-quattro@coimbra.ans.net

lenny rosenbaum wrote:

> >I had the same problem... There is a kit available from the dealer. It
> includes special bolts. When you line up the bracket against the bumper,
> you will notice 2 small "dimples" embedded into the vinal on the bumper
> skin. (The plate frame must be perfectly centered) This is where the holes
> are to be drilled. There are hidden nuts within.

Correct about lining it up, but there were no hidden nuts on my car.
There are two ~1" DIA holes in the aluminium reinforcement, though.
Hmmmm...

Igor Kessel
'89 200TQ

References:
- Re: Where to mount front license plate
  - From: lenny rosenbaum <lenny@spectra.net>

Prev by Author: Re: Spring Carlisle for Imports
Next by Author: Re: help - power steering pump noise
Prev by thread: Re: Where to mount front license plate
Next by thread: Where to mount front license plate
Index(es):
- Author
- Thread