[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

should the wot switch "click", opinions on Beartrackers?



I have two unrelated questions that I am hoping you kind folks can help me with.

1. Should the wot switch on a 90 200 q "click" at wot? The resistance on mine
   reads 3.0 ohms from about 7/10 to wo throttle, but the change from inf. 
   resistance to that reading is not accompanied by a click, such as occurs
   with the idle microswitch. Also, the 3.0 ohms seems too high.

2. Has anybody used the Beartracker scanners that look like radar detectors
   but are infact small scanners that pick up the low power officer to 
   car transmissions? Any good?

TIA!

Dave

90 200qw  123,000
87 Alfa Milano 3.0 145,000