RE: should the wot switch "click", opinions on Beartrackers?

["Sheffield Corey" <SHEF@omdc.gso.uri.edu>]

>1. Should the wot switch on a 90 200 q "click" at wot? The resistance on mine
>   reads 3.0 ohms from about 7/10 to wo throttle, but the change from inf. 
>   resistance to that reading is not accompanied by a click, such as occurs
>   with the idle microswitch. Also, the 3.0 ohms seems too high.


Hi Dave,

	I have a brand new Bosch 0 280 120 308 sittin' here next to me. There
is no click at WOT and from ~7/10th's to the stop it shows a dead short, dead
open before that.

HTH,

Shef

            5000CSQUATTRO5000CSQUATTRO5000CSQUATTRO5000CSQUATTRO
            0                                                  5
            0                    Shef Corey                    0
            0         Ocean Mapping Development Center         0
            C         Graduate School of Oceanography          0
            S            University of Rhode Island            C
            Q               Tele.: 401-874-6879                S
            U          E-mail: shef@omdc.gso.uri.edu           Q
            A                 Ex-QCUSA: #1857                  U
            T                                                  A
            T  QUATTRO: the way to GO when the road says NO!!  T
            O                                                  T
            5000CSQUATTRO5000CSQUATTRO5000CSQUATTRO5000CSQUATTRO