[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Trade-in Gamma for Delta? DID IT
In a message dated 97-04-04 21:58:53 EST, you write:
<< but
before I start I have the following two questions:
Are the rear/front speakers 4 ohm? Should I consider switching to 2 ohm?
Does the Delta have pre-amp phono-style plugs?
To pull head unit, did some posts past mention using a jig made from
finishing nails? Does the finishing nail head or tip go into the unit?
>>
Sorry, I see FOUR question marks not two !!!
Haven't held one for some time but 4 ohm comes to mind. The Delta, as the
Gamma & Weisbadden uses the "VAG Style" ( Don't know what else to
call 'em ) connector. Not much of an AUDIophile so I beg off your 2 ohm
thing.
The official "pullers" look like a "U" shaped piece of coat hanger with an
indentaion about 6mm up from the tip to give it some "bite". I could see
where a finishing nail might be a little sturdier then coat hanger and work
better. The purpose is two-fold, retract the spring clips and to give you
something to pull with. Many people on the first few tries get bruttal
and end up ripping the face plate off.
Hope that helps, but there can be no promises when you loose
count of your question marks.
Vince Lyons