[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: stainless steel brakelines



I followed everyone suggestion and got the brake lines from GPR.  They 
work great.  Only have one installed now, I'll get to the rest this 
summer when I rebuild the calipers and replace the parking brake cables.

If anyones interested, I made my own homemade pressure bleeder.  Took a 
brake reservor cap from the junk yard, cut out the brake level sensor at 
the top and super glued a tire stem in it's place.  Used a bicycle pump 
to provide pressure.  Worked kinda slow, could only get about 15-20 psi 
of pressure.  So I decided to increase the pressure difference by 
connecting a Mitivac on the bleeder valve.  Helped quite a bit, 
especially on the rear brakes.

Thanks everyone
	-Mike