[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Error codes



Phil sort of answered my question about dumping error codes.  The Bentley
outlines the procedures for all types of motors/ignition except the Motronic.
It specifically calls for the 1551.

I dumped them anyway with an error code "2322"  intake air temp sensor.  I
pulled back the rubber boot and discovered the wires were indeed broken.  The
connections almost look like they were destroyed via arcing.  The solder joints
were separated, but the rubber boots have holes in them.  Only the absence of
black/charred rubber makes me doubt the arcing.  The sensor checks bad anyway --
only about 80 ohms.

BTW:  My car (California model) also blinks the code via the check engine light.

Joe Yakubik