[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
UK spec 200 Turbo coolant temp sensors.
In message <VA.00000240.071d7bcc@maximum-bhp.u-net.com> Chris Wilson writes:
> 1987 UK spec 200 turbo 2WD.What are the senders around the top rad
> hose to head area?
> 3 with 2 wire connections,one big `un with a multi plug on it,which is
> lowermost,and further forward,a small,single wire sender,which I
> assume is the temp gauge sender.(The gauge doesn't work,and earthing
> the single connection sender cable only sends the gauge quarter way
> up.
Yellow and black wires - knock sensor. Black wire - coolant temperature to
ECU. Black/white and green/white - thermo-time switch for the cold
start injector. Black/green - idle stabilisation thermoswitch.
The sender for the gauge is on the back of the cylinder head - brown/black.
--
Phil Payne
phil@sievers.com
Committee Member, UK Audi [ur-]quattro Owners Club