Re: OX sensor confusion

["Graydon D. Stuckey" <graydon@apollo.gmi.edu>]

On Thu, 8 May 1997, Peter Orban wrote:

> When the engine is working in the closed loop, the output of the ox sensor is
> oscillating between 0 and about 1 Volt. The time period is about 100 msec.

The time of oscillation is not usually that fast.  On the CIS-equipped 
Quattros, the time is more like a half to a full second depending on what 
the rpm and load conditions are.   On real EFI cars, that rate is 
calibratable in the original software, BTDT.

The best is to use a commercially available LED meter that was designed 
to read the O2 sensor.

Later,
Graydon D. Stuckey 

"Cool name man!" - Jay Graydon   :-)