[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
UrQ ignition woes, HELP
In the never ending battle to get to the bottom of the no-start
condition I checked the plug wires. All resistances were as
specified except the coil wire which had 2000 ohms. The
spec says 800-1200 ohms. Is this way off? Maybe I have a
slightly longer wire than the stock one? Anyone have any
thoughts. Todays diagnosis is the ICM (not the ECM), only
$40 from Carlson, $55 from Blau, and $70 from Santa Fe.
Thanks.
Andrew Finney
1983 UrQ.