[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

QTC tie rod



The QTC tie rod I purchased from the dealer is too big for the steering
knuckle on the 4000Q.  Max at AVS said that the QTC end screws right out of
thetie rod and to use the tie rod end from the 4000Q.  Well the QTC tie rod
end is crimped into the tie rod and has male threads.  The 4000Q has female
threads.. I know people have done this before and was wondering if anybody
could help me.  Any BTDT's would be greatly appreciated.

Scott