S6 fan update...

[Dave Head <dhead@sundial.net>]

Well, it looks as though with the stock tq fan shroud configuration the S6
fan flows about the same air at medium speed, and 'somewhat' less on high
speed - my overheat problems with AC on continue, I wouldn't doubt this is
due to some reversion now due to the large gap between the fan and the
shroud. I would like to get my hands on a 91 200q/S4/S6 shroud to try it
out. The 4A0 959 465A fan via Linda, incl shipping was 31.00 (I now have 2).

The plus side still has a much quieter fan operation and less load on the
motor due to a smaller and significantly lighter rotating assembly. I may
try some duct work later on to see if I can get any further improvement.

I'm about ready to try dropping 160.00 on a Hayden 16". It flows like 1600
cfm... Can't see a way to mount a pusher fan -  the 100 euros and the AC
muffler pipe are really in the way...

********************************AUDI FAN***********************************
                                   EMCM(SW) Dave Head  
87 5KCStq 199K miles                1.7 bar 
    qcusa #3442                 Maitland, Florida   
******************************************************************************