Re: rings -Reply

[fred smith <smitty@mhv.net>]

afinney@tamsconsultants.com wrote:
> 
> Thanks. Big time BTDT. Did you use a lot of soap and a little
> water? Did you sqeegeee the decal? Did you allow the soap
> and water to dry before removing the backing? Sorry for so
> many questions. I don't want to make a mistake.
> 
> Thanks.
> 
> Andrew.Andrew,The Rings are not true decals.they are pressure sensitive.What i 
do is: 

1.clean the door.Remove wax etc.
2.Spray the door with "WINDEX" useing the spray bottle.(dish detergent 
  and water will do).
3.Remove the paper from the back side of the Decal.
4.Align the lower left hand corner of the sheet with the lower lt.hand
  corner of the door.(drivers side).
5.Press the decal in place.
6.Smooth/squeege the air/bubbles etc. from under the decal.
7.Carefully remove the top layer of paper.
8.Let rest/dry.
9.Stand back and admire your work.

Smitty