Re: Stalling on 1990 200 tqw

["mike miller" <MikeMilr@email.msn.com>]

>The best way to check this is to
>pressurize the intake manifold with approx 15 psi and spray soap on the
>suspected areas and watch for bubbles.To pressurize the intake make an
>adapter to fit in the hose that attaches to the intercooler.

I made one of these from a 3 inch ABS rubber end cap and a tire valve (the
type that has the nuts to tighten a rubber donut to seal it). Just pull the
hose off the airbox and pressurize away. Cost was about $8. Used this on
Peter's 91 200 tqw and found a small leak around the dipstick.

mike miller - renton, wa
91 200q