Cup holders for 89-91 200TQ

["Scott M." <scottmo@teleport.com>]

Well I hate to start a cupholder discussion but......

A local Audi enthusiast (John Karasaki) showed me a copy of
an Audi service bulletin that describes a cupholder
retro-fit for the 1992 Audi 100. There are two and three
cup versions. The cupholder consists of two halves that 
Velcro to the sides of the center storage tray.  I ordered
the  two cup version (light gray) in the hopes that it
would fit my earlier 89 200TQ storage tray. The color
matched exactly and they are a little shorter in length
than the tray but they slide right in and work very well.
They are designed to hold two 12 oz Pop cans or the narrow
ends of a large soda cup. They have tangs that slide under
the top lip of the storage tray and then you pivot the
piece down so the Velcro backing holds them to the carpet
in the tray. 

The part numbers are 4A0-862-534A (+ color code) and
4A0-862-533A , they cost around $11 each side. 

There may be a version available for the early V8's as I
saw a 93 V8 with a center cupholder setup.

Happy sippin.....

Cheers
Scott M.
89 200TQ
CHIPDIPPINDUDE