Re: K-Jetronic

[mike posner <posne@cts.com>]

At 11:05 AM 9/2/97 -0500, Jeff Johnson wrote:
>I have a question on the air flow meter on the 81-Audi Coupe...
>
>I read in a couple of different sources, a different placement of the air
>flow sensor plate...
>
>   \  /
>   |  |
>
>One source says at the bottom of the \ /   and another says at the bottom
>of the | |.
>
>Which is correct?
>
>Thank You
>
>Jeff Johnson
>
>Jeff, the upper edgeof the plate must be flush, or at most .0129.(3mm)
below the cylindrical part of the air venturi.Your drawings suggest the top
one
may be correct but it doesn't look look cylindrical. My take on this is
that it is the
narrowest point on the slope before it begins to widen again. Mike