Air Flow Sensor ride hieght

[waves@epix.net]

A visual adjustment of the air flow sensor position is very inaccurate.
There are precise specs, down to the mm as to not nec. where the level of
the sensor plate itself is, but rather how much play there is at the fuel
plunger. I don't remember the specs, but yes in general, the plate should be
just a bit lower than level. More importantly is that the plate is not off
side to side. Pull up on the plunger and it should not have any resistance
in the way of plate to cone contact.
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><
                       Rolf Mair is: waves@epix.net
        Racing Resume for Sponsors/Corvettes for sale/Racing Pix @
http://www.sevenwaves.com
    Head Coach and Founder of the Seventh Wave jr. Ski Racing Team @ Doe Mt.Pa
               1994,95,96 East Coast USA SCCA Solo 1 Champion
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><