[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Bosch euro lights won't adjust left-right???
At 09:35 AM 9/9/97 -0400, you wrote:
>I have a question for those of you who have installed euro lights
>in your 5000/200: Do your horizontal adjustment knobs do anything?
>
>I finally had enough time to install my lights - and have found that the
>horizontal adjustemnt knob (the "top" one) has no affect. Am I missing
>something here? They are Bosch Units (I am not sure if there are also Hella
>versions).
Having completely dismantled 100 euros for replating... There is a pivot
ball in one corner. Three point mounting. The horizontal and verticle
adjustments are a bolt (albeit long) that threads into a plastic piece to
accomplish movement. Possible problems: Plastic piece broken, or you
unscrewed too far. Removing the lamp assembly and peering into the back at
an angle (while attempting to adjust) should give you the answer. Possible
on the 100s, anywho. None of these components are available, either. Glueing
with Devcon 'Plastic Welder' TM works primo...
********************************AUDI FAN***********************************
EMCM(SW) Dave Head
87 5KCStq 205K miles 1.7 bar
qcusa #3442 Maitland, Florida
******************************************************************************