Subject: Re: C-GTlopin' update

[quk@isham-research.demon.co.uk (Phil Payne)]

In message <970929124548_814092679@emout10.mail.aol.com> C1J1Miller@aol.com writes:

> Make sure you are using the compression tester correctly; my understanding is
> that you want to remove all four plugs, make sure you have a fully charged
> battery (or use a jumper from another car...).  IME, my cars have typically
> been within about 3-4 psi across the board, so your numbers don't look so
> great to me.  Try adding a little oil to each cylinder in turn to see if that
> has a dramatic change... could have scored piston walls?...

And if you get a low adjacent pair, try re-measuring each with a plug in the 
other.

BTDT. 

-- 
 Phil Payne
 Committee Member, UK Audi [ur-]quattro Owners Club