[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
pulling codes
I tried pulling the codes on my '91 100 I5 with no results.
Used the #10 relay in engine bay labeled "K-jetronic" with fuse slot on top.
put fuse in top of relay for varied lengths of time but dash showed no codes
at all. There are several relays under the dash (driver side) that are very
difficult to access. One of which has a fuse slot in the top. Could it be the
code producing unit?
When I tried the one in the engine bay, the idle increased about 200-300 RPM
and held. The car has poor partial throttle response. Wide open throotle is
fine. Hence I want to pull the codes.
Did replace the alternator, and solved that problem.
TIA
Dennis Graber