[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Targeting Clutches

In a message dated 97-10-19 13:53:16 EDT, you write:

<< The torque values are reversed in some of the manuals, but not all. Best
 to remember that the FW/crank value is the higher number, no?
 Wolff
  >>
Yes, the attaching bolts FW to crank are 55/74 ft/lb (with shoulder/without
shoulder), the small 6mm hex bolts PP to FW are 18ft/lbs.  30.8 in Bentley
has them reversed.  A quick look at putting 5574ftlbs to a 6mm hex makes ya
kinda laugh.  30.2 (5spd 016) gives the correct values.

HTH
Scott