Re: Alt Reg. Mod from TurboBrick page

[Igor Kessel <e6941tb@ix.netcom.com>]

Huw Powell wrote:

> The only comment I would have it it seems like it says to use 16 GA wire
> for the + output.  Isn't that a little light for 90-120 amps?  Aside from
> the overkill typical in my high current applications, what are the DC
> ratings for the various AWG's?  Anyone?

No less than 0 Gauge, I would go with a 00 Gauge.

Thanks, Eric, for the tip. I am gonna try it.

-- 
Igor Kessel
'89 200TQ - 18psi (TAP)
'98 A4TQ - on order...again. For the third time and counting.
Philadelphia, PA
USA