Re: ABS and ur q questions

[turbo@steelcity2.steelcity.net]

EICHSTEV@aol.com wrote:
> 
> Yesterday a picked up the wiring, controls (with accellerometer) and
> hydraulic unit from a '91 200q.  Yes, the plan is to put this in my ur q.  I
> know I must change strut housings (hmm, good time for coil-overs) and add the
> outer CVs with the encoder rings.  I plan on using modified late 5ktq front
> strut housing or the late 90q struts with the separate hub carrier assemblies
> and cast A arms.  I have a set of rear bolt-on CVs from a V8 (along with the
> brakes :) ) and the hubs which I might try to utilize if possible.
> 
> So, the question is: Are the number of teeth different on the CV's on the
> 5ktq vs. the 80/90/100/200/V8s?
> 
> Steve Eiche
> '82 Not So Ur q 3B2B
	It does matter which number of teeth you use and they are different.Go
for the toothed wheel for which ever car the control unit was removed
from.
turbo
turbo@steelcity.net