Re: Fuel filter location

[Orin Eman <orin@WOLFENET.com>]

> In message <FOAMHBLLKPNMAAAA@mailexcite.com> " Nick Ramone " writes:

> > Yea and make sure you dont do what I just did
> > 
> > 1. Break the copper fuel intake line going into the fuel filter (it turned 
> >    with the fuel line bolt head and broke in half)

> There's a hex formed on the fuel line to take counteracting torque.  I've found 
> the best tool for doing this is _NOT_ a purpose-made flare nut wrench, but a 
> good quality adjustable with thick jaws.  

Thanks Phil.  That'll probably save my knuckles next time...
Last time the flare nut wrench came flying around and removed
a fortunately small chunk of skin.

Orin.