Re: Thermal barrier coatings -- possible list discount

[Gerard <gerard@poboxes.com>]

> Yes, I am very interested in having my exhaust manifold and turbo hot
> side coated in the not that distant future.  I doubt that this company
> is interested in Extrude Hone as well, but my plan is to have that
> done as well.  AAMOF, what would be interesting to me is whether or
> not there is sufficient mass to contemplate a mass purchase of 2-piece
> EMs, followed by Extrude Honing and then thermal coating.  In the case
> of the urQ there needs to be some machine work done to the 2-piece to
> make it work.  This would probably need to be done prior to coating.

This coating stuff seems quite good and makes sense. But has anyone
thought of looking at the following site?

http://www.dragnbreath.com/TechLineCoatings%20Folder/TechLineHome.html

The coatings that gets put on are simply sprayed on and baked. There
are ones that use the exhaust heat to bake. The job to the manifold and
some other "external" parts can be done yourself.

G.
-- 
"a thousand miles from here, there is another person smiling"
name   : gerard van vught
tel    : +27-57-912 2658 (w) / 082 923 9609 (cell)
url    : http://www.acenet.co.za/homepages/gerard/
e-mail : gerard@poboxes.com  / han.solo@galaxycorp.com
         gerard@acenet.co.za / van_vught@frg.issi.co.za