Re: Removing Badges / Emblems

[Orin Eman <orin@WOLFENET.com>]

> I've just used a couple of small flat-head screwdrivers and/or dental
> tools. Take some good solvent (citrus based is good) and the foam
> residue/glue will come off - note this part takes a few minutes, but
> there's no reason to go out and buy a heat gun-  you can easily do
> without - and no burned fingertips! The heat gun trick is nice, though.

...but if you have a hair drier, use it!  WD-40 (!!!) worked well to
remove the glue goo for me on my '86 5kCSQ and didn't harm the Alpine
White paint.  A little cleaner/polish afterwards and you can't tell
where that particular badge was.

Orin.