[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Installing driving lights - help
I got power from the 'jumping terminal' which is under a plastic cover near
the washer reservoir. The terminal is actually a bolt. You can unscrew
and slip a lun underneath. To go through the firewall, use the big rubber
grommet near the steering column which has a big wiring harness going
through the center. There are small rubber protrusions around the
perimeter of this grommet for this purpose. just snip off the end of one
and slip the wire through from the inside.
Ralph Poplawsky
'91 200TQ
At 08:20 AM 11/25/97 -0500, Rob Winchell wrote:
>Q -
>
>I am installing driving lights on my 91 200, and have a couple of questions
>for people that may have BTDT.
>
>1) Power: where is the best place to get power from? Obviously taking it
>from the battery is no good since its in the back. I've heard people talk
>about taking it direct from the alternator - how is that done?
>
>2) Where is the best place to go through the firewall for the switch?
>
>Theses are Catz lights, so anyone who's been there, I'd like to hear from.
>
>Thanks,
>Rob Winchell
>
>
>