Re: Jamex air induction kit...

[Hulda Jowett <hjowett@mcla.mass.edu>]

K&N produces square filter (sort of box shaped w/o a top or bottom) 
elements that would be suitable for producing your own kit. You'll just 
have to find the appropriate size.

This brings up the old thread about hot underhood air being sucked into 
these filters. Then degrading performance, instead of increasing it. I 
measured the air temp that these filters take in, on my Corrado temps 
rose to 30 - 40F above ambient. Not a good mod.

Later,

Brian
93 Corrado VR6 3.0L GT, Syncro on the way
87 Scirocco 16V, 2.0l to be