Re: WOT/Idle Switch Assembly

[Dave Head <dhead@sundial.net>]

At 08:54 AM 12/1/97 +0200, you wrote:
>Hi!
>
>I want to check my WOT/Idle switch assembly. The thing looks sealed
>closed.

It is...

> Does that black plastic cover clip off easily to expose
>the switches within?

Nope.

> I pulled the throttle back off idle, there is a
>satisfying "click" as I hear the switch leave idle position, but no
>satisfying "click" is  heard when the throttle gets to full (1/2 or
>2/3 or over) position. Should this be like that?

Yup.

 Just want to know
>what people normally use to pull the cap of this thing, I don't want
>to stick screwdrivers into the clips only to successfully pop one of
>them off for good. :)


Its glued together 'quite well'. Score the edges with a raxor blade/Xacto
knife and pry apart. The idle switch is a microswitch. The WOT is a leaf switch.

********************************AUDI FAN***********************************
                                   EMCM(SW) Dave Head  
87 5KCStq 212K miles                1.85 or so... bar 
    qcusa #3442           Maitland, Florida     plate: STLTHTQ
******************************************************************************