Evans cooling system

[Avi <Avi@cosmoslink.net>]

Hi Igor,
I have some questions regarding the Evans system, BTW i purchased today 3
gallons at $20 a gallon:

1. I will be using a VW press. cap (your idea), plug one valve, the open
spring loaded one and leave only the smi sealed one operational,
2. I will flush the system using a cooling system additive and running a
hose flushing set up  with hot soft water,
3. I have an 80C thermostat installed and can get a 70C thermostat if
needed...
4. after the flush (with water) I will drain the system 
5. I will remove the thermostat to get as much water as can out of the engine
6. install the coolant and vent the Aux.tank (no cap) to boil the water off

Your comments........
Thanks 
Avi
BTW, when are you going to be here? CA