V8 CV boot repl

[FBFISH@aol.com]

Help- My 1990 V8 is sitting half way into my garage up on blocks with the
front wheel on the passenger side torn apart. This woudn't be so bad except
its below freezing and my wife wants the garage door closed!! This three hour
job (my estimate) is taking considerably longer. Perhaps someone out there
has done this job and can offer some help. My specific Questions  are: 1) is
there a special tool to press out the pivot pin on the track control arm? 2)
must I remove the entire axle from the car to replace the outside boot, or
can I do it from the wheel end? Thanks in advance--Frank Santoro Baltimore
Md.