RE: 200q Body kit / spoiler manufacturer....

[Sargent Schutt <sargent@novagate.com>]

I have a couple of mild but aesthetically pleasing 'skirt' mods on my 91
200q:

(1) A rubber chin spoiler of unknown origin (prolly can be had from JC
Whitney) that mounts nicely to the lower lip of the front bumper cover.
I would expect to pay around $100. As it is flexible rubber it is
entirely curb-proof. No worries, and better looks.

(2) A set of side skirts made by GTO. I got them from AVS (perhaps also
available in JCW, and BTW I've had positive experiences w/AVS). They
cost $85 and must be cut-to-fit. I cut them so that they creat a flat
side under the doors, something along the lines of the V8 and/or the
newer 740 WMBs. They are flush with the underside as well. It all looks
quite factory, not garish at all.

The overall effect is a more aggressive look without going boy-racer. I
also have larger 16" ACT LS mesh wheels which add a bit of a sporting
air, but look like the factory wheels (including OE rings in the cap).

All the above works on any of the 5k/100/200 cars 84-91. I've also
installed different lights all the way around.

I have photos+ scanner if anyone wants to host on-line photos. Won't be
back on-line until 12/28

Sarge

91 200q
86 5ktq