Re: Re-using lock cylinder pins

[Huw Powell <human@nh.ultranet.com>]

> When replacing the lock cylinder on the driver's door, my experience
> was that the cylinder pins could easily be pulled out of the original
> cylinder and intersted into the new one.  No measuring required.

The reason I measured is I was using new pins from my collection - the
old ones were very worn and barely worked (lots of key wiggling to open
the door).  Otherwise, as you point out, it's *very* easy.

-- 
Huw Powell

http://www.thebook.com/human-speakers

82 (+/-) Audi Coupe