Re: Door Strikers

[audistuff@juno.com (Paul R Anderson)]

>>
>>Question:  The little posts that the door locks clamp on to have 
>mostly
>>           lost their little nylon collars.  The posts can be 
>loosened
>>           to determine the exact fit of the door - can they be 
>completely
>>           _UNSCREWED_ so that they can be replaced, or does the 
>captive(?)
>>           nut within the B pillar fall down inside the pillar?
>>
On the 5000, the pins can be unscrewed.  The captive nut is held in a
cage
to allow for adjustment.  If you don't mind running metal on metal until
you
find a suitable source for pins or decide to wrap them in electrical
tape, you
can adjust the pins in slightly to hold the door tight against its
seal.

Hope that helps:


Paul Anderson: Private email AndersonPaul@juno.com