Use of Cold Start Valve

["Mike Hopton" <mike@genesis-microchip.on.ca>]

     Douglas,
     The concern I have heard about using the cold start valve for WOT fuel 
     enrichment is it's position in the inlet manifold. Others have 
     expressed concern that the valve would not provide an even distibution 
     of fuel to all 5 cylinders. Cylinders 1 & 2 being furthest from the 
     valve could run lean? I'm not convinced on this argument but hey I've 
     been wrong before :)
     
     Any BTDT's on the list?
     
     Regards, Mike