[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: piston for mc engine
In my experience, WR code 5 cyl, and from others I've spoken with, the
#5 is often the first to suffer damage due to poor cooling and heat
transfer in the rear of the engine bay. While my car seemed to run
well,(less than 40K miles) I was losing power somewhere, I pulled the
head for a look around, it turned out that #5 piston was breaking up
between the rings. Luckily none of the metal bits got past the rings.
All the other pistons looked new as did the bores.
I got my pistons from IPC, not sure of their new name. @ $95, seemed
expensive at the time but virtually everyone said this was a deal. I
would give them a buzz if you want to go new. If other listers don't
have the # I can prolly find it. If you want used try Chris @
Autobahn01@aol.com.
Good Luck
Mike
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com