Seeking further funding to finish the 4ktq conversion before
the Steamboat event...
Donor Vehicle: 12/85 5ktq w/ABS gray w/ gray velour
Car is running, driving and registered currently.
No areo lights
4 working window regulators $50 each
Drivetrain (5 speed tranny and rear diff) $200
takes all gears, I have locked the center diff, need to verify the rear
4 ABS axle half-shafts $50 each, $175 for all
Bumpers (not perfect, but reasonable) $50 each
Fenders $50 each
rack & pump, working but condition unknown. $25 with lines and pump
ABS brain, controller, and various bits, sensors etc. $50
exhaust system, can't hear it over the manifold leak... $70, $80 with kitty (if good)
Fuel pump,with sending unit (or two if you want) $50
Instrument cluster $40
Headlight switch $45
Heater controller bits (brains, pumps, etc - the whole shebang) $50
Quad headlight setup (buckets, bezels, bulbs, partial wiring) $45
Front and rear calipers (no G60's) $40 each, $100 for all.
Power mirrors $35 each
Radiator, looks okay so far... $70
Five speed turbo downpipe $50
Oil pan $15
Also some bits from an '86 5kt:
2 non-ABS front axle half-shafts $40 each
Instrument cluster $40
most of the heater bits (don't think I'm missing anything, but can't remember) $30
one power mirror (Left side??) $35
one rear window regulator (right side??) $50
oil pan $15
Automatic turbo downpipe $50
Then the "you want 'em? come get 'em... in Central NH" pile:
Doors with glass (and interior panels??) $10 each
Trunk w/broken center reflector from 5ktq $25
Hood from 5ktq $50
2 Dashes $25 each
Set of gray heated leather seats (power barco loungers) $40
Set of gray velour seats (power barco loungers, supposedly heated) $30
(5) 205/60/15 tires in fair to reasonable condition. Pirelli HP's (at least the
one I looked at) $30 each, $100 for all.
Other misc pieces are also available, such as harness and used
suspension pieces, used steering components, sunroof stuff. You mention it,
and I'll try not to throw it away. Rims and struts/hubs are spoken for. The come
and get it stuff could be shipped, but it's a PITA! It will cost extra.
I'm keeping the prop shaft, even though I don't currently have a used for it. If you do,
make an offer and I'll consider it.
Guess that's most of it... Buyer pays shipping, how fast can you afford?
-Stott
Stott Hare
Application Developer
Policy Administration Team
harest@allenbrook.iix.com