[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: distributor rotor

To: Dan Simoes <dans@ans.net>
Subject: Re: distributor rotor
From: John Graham <jgraham1@erols.com>
Date: Fri, 02 Jan 1998 18:53:49 +0000
CC: mnjue@earthlink.net, quattro@coimbra.ans.net
References: <199801022320.SAA10813@titan.purch.ans.net>
Reply-To: jgraham1@erols.com
Sender: owner-quattro@coimbra.ans.net

Dan Simoes wrote:

> >
> > Are you sitting down? You have to replace the whole distributor  to change
> > it.
>
> You sure?  I just ordered a new cap and rotor and verified
> they were for a 20v...  I seem to recall this discussion
> about 16v 1.8 VWs as well.

I'm going by my Bently manual. I says the rotor is bonded and can not be
removed.
It showed no changes from march 1990.

So why would they bond a replacement part to the shaft?
And if they made a change, how are we going to get the dam thing off. :-(

John
1990 CQ

References:
- Re: distributor rotor
  - From: Dan Simoes <dans@ans.net>

Prev by Author: Re: distributor rotor
Next by Author: Re: distributor cap and rotor
Prev by thread: Re: distributor rotor
Next by thread: Re: distributor rotor
Index(es):
- Author
- Thread