5KCSTQ A/C Heater Blower

[JJK1204 <JJK1204@aol.com>]

Hi,
I am new to the digest and I have just purchased an 87 5KCSTQ for $900.00 US.
The body and mechanicals, except for the front struts are in excellant
condition. The only problem seem to be electrical. The radio fuse was blown
and the ABS switch was broken and the fuse on the relay was blown. The major
outstanding problem is the A/C heater motor. It is dead and I have purchased a
new one. I connected it to the wiring harness and it works fine. My
question/problem, which is NOT addressed in the $125 Bentley manual, is the
proper way to remove and install the motor/blower. I am guessing that the
entire case/motor/blower/heatercore must be removed or at least pulled out far
enough to slip out the motor/blower. Is this correct? If so what has to be
removed from the case from the inside of the cabin? 

Thanks,
John Katos

87 5KCSTQ
87 Alfa Milano Platinum
86 Alfa GTV6 (sons)
73 Alfa Spider
69 Alfa GTV
95 VW Golf III (sons)
97 Dodge Ram (I need something to tow the Alfas!)